• interesting one


Updated: Jan 20, 2021


This tool is ideal if you need clean edges from your saws and planers. Its V-shaped sole is a perfect 90-degrees. Let it rest on the corner of your workpiece and the tool centers the cutter on the edge. It has a thumbwheel to adjust the depth of the cut. The tool’s corner planes can easily be adjusted. The important aspect is that with this tool your profiles will never appear heavier at one end of your piece. A very handy tool to add to your toolbox

T11 Router -

This tool is a heavy-duty router designed for use by professionals. It can be used in the workshop and on-site. The tool offers maximum control at the start of the cut. Its plunge lever and the power switch are within comfortable reach of the handgrips. The adjustable side fence improves accuracy. The variable speed allows you to work on different materials. It offers an up to 80 mm plunge depth.

Evolution Metal Saw Horse With Folding Legs (Twin-Pack) -

If you are looking for a foldable and portable sawhorse, this tool with its two sawhorses is what you are looking for. It can support 1,100 lbs. per horse. The folded horse can be set up in seconds and is very stable with its quick-lock levers on the legs. It has 4 cast steel hooks which fit 4x2 timber. A must-have light-weight, durable tool for every tradesman or DIY enthusiast.

Mafell HIT-M 65 9K0001 Zero Joint Cutter Edging Machine -

This edging machine work on all standard zero joint edges with material form 0.4 mm to 3 mm in thickness. You can lock the machine’s angle setting for commonly used edges. It is also freely adjustable for angles up to 55-degrees. The machine is designed to be worked with comfortably. It comes with a support plate, a 50-degree swivel, cleaning brush, locking bolts, a variety of keys, and a connection cable.

BOW Products FP3 Feather-Duo Stackable Feather-Board –

This tool is ideal for tall material feeds. If you need to, it can be broken down to be used as two individual feather boards. It is designed to provide a smooth glide on the infeed and gives kickback protection. The tool has a large contact area and thus tension is dispersed over a wide area. When a feather is accidentally cut, you can just replace it and don’t have to replace the entire board.

Steel Stand Rockler Rock-Steady Folding -

When you have small spaces where you have to use work surfaces or router tables, this folding steel stand offers the ideal solution. It has a weight capacity of up to 200 pounds. This is made possible by its thick gauge steel body, pivot points and anti-racking support. To fold it up again you just pull the pins, lift on the table, and then fold the legs. It can easily be stored or transported.

Bucktool Combo 2" x 42" Belt Sander 6" Bench Grinder, Knife Sharpener BG2600 –

Do you need a sander and grinder? This tool gives you both in the same tool. It is the ideal tool for general sanding and finishing on most metals, plastic and wood. With this tool, you can surface, finish, sand, grind, polish and deburr your material easily. The belt can be positioned horizontally and vertically. The cast-iron work table offers good support when sharpening. Belt-changes can be done tool-free. For safety, the switches are mounted in front

1 view0 comments