TOP 7 DIY WOODWORKING TOOLS PART 23
If you need precise depth cuts you need these router planes. They are ideal for tenons, mortises, door locks and any work that requires a precise depth. Their vertical square blades can easily be sharpened with a knife sharpener. The blade comes ready to use. Three sizes of blades are offered and the default is an 8MM blade. The stainless steel body is 4.13 inches long and 2.75 inches wide.
These toggle clamps are auto-adjustable. This means the clamps give you consistent pressure as they automatically adjust to different-size workpieces. They rotate the adjustment screws to give the required clamping pressure. With these clamps, you can replace several other standard toggle clamps. This is because of their expanded range of clamping force and height. With these clamps, you eliminate the constant need for adjustments.
Auto-Jig Pocket Hole System
This package includes the Auto-Jig, 50 assorted screws, and a 6″ face clamp. It is fully automated and self-adjusts your drill guide setting and drill bit collar. Its adjustments are based on the thickness of the piece you’re clamping. You don’t have to set, measure or adjust manually. Just put your workpiece into the clamp and the auto-jig does the rest. This tool is designed with the woodworker in mind.
Drilling Jig Set for Concealed Leveler
This leveler can be used for the whole range of Rekord 12 levelers. For each height set the position of the superior “drilling guide bushing” accordingly. With this leveler it is possible to manage different panel thickness. Drill bits from 12mm to 25 mm can be used. For a different thickness of the material, you can use the provided spacers. This will ensure that the hole is always in the middle of the material.
This clamp is very easy to use. You simply attach the clamp to the cabinet for which you wish to trace a filler, a crown, or a toe kick. You have to use a block the same thickness as the cabinet to trace your width on the part and cut out your finished part. Its clamping capacity is 1/2 to 2 3/8 inches. You can trace a part of a thickness from 3/8 inch to 1 inch. The clamp needs 2 7/8 inches of clearance inside the cabinet. For durability, it has an aluminum finish.
It is very easy to work with this sander. You simply cut the sandpaper, insert it and tighten. That is all you have to do. It is equipped with a new tightening technique that ensures that the sanding surface stays even. When you use it with the lathe the drum sander will be refind. With this tool, sanding is always level and precise. It is a very reliable tool. You can tighten sandpapers from fine to rough. Diameter: 35 mm (1 6/16"). High: 50 mm (2")
Joiner's Combination Square
This combination square is a versatile and accurate tool with many features that make it the tool you’ll want to work with every time. If you need to set your router bit, just slide the head to the end. Then engage the push-button indexing pin into the blade. Lock I and the scale stands upright for accurate adjustment. It has a wide foot and thin blade to make this an ideal square for setting your table saw.